|
|
Navigation: 
Start
Physics
Mechanics
|
|
|
|
|
|
Allows experiments in statics and dynamics. Most parts of metal, well-finished, plated or painted, and easy to assemble. Set consists of:
1. Triipod stand: Finished in baked hammertone paint. Leveling screws and plated, metallic rod. Two base legs have hole each to take clips at no. 4. Third leg has through hole for a screw at no. 10.
2. Slide: Two half-meter scales, rigidly clamped at ends by L-sections with metal extensions for holding pulleys at no. 12.
3. Lever: Half-meter wooden scale with holes drilled every 2.5cm.
4. Clips: 2 pieces, 25-mm long stem with spring-steel clips to fit into holes of tripod base legs.
5. Clamps: 2 pieces, rectangular metal block with two through-holes and two tightening screws to take adapter at no. 6, slide holder and pivot at no. 8 and no. 9.
6. Adapter: Metal cube 25mm with through holes for using with clamps at no. 5 and slide holder at no. 8. Tightening screw and stem (diameter 12.5mm, length 25mm).
7. Right-Angled Support: Well-painted, right-angled, metal bracket with collar and tightening screw. Pulley at no. 11 can be hung through its hole.
8. Slide Holder: Metal block raised at center on top to take slide. With washer and a tightening screw. Stem diameter is 12.5mm, length 25mm.
9. Pivot: Length 25mm, diameter 12.5mm, with spindle (diameter 3mm) and milled-head nut. For use with lever at no. 3.
10. Screw: Milled-head screw 37mm long, with washer and wing nut. For use with slide at no. 2. Slide can also be held vertically to base with help of this screw.
11. Pulley: Metal pulley, diameter 70mm, in open metal frame with two hooks.
12. Pulleys: 2 pieces, as above, diameter 50mm.
13. Roller with Bracket: Weight about 500g. Diameter 37mm with two pivoted yokes and two hooks.
14. Disc: Diameter 50mm, accurately centered with axle pin.
15. Pendulum Bob: Wooden, with hook and pointer.
16. Pendulum Bob: As above, metal.
17. Cord: About 3m length with two rings.
18. Tommybar to tighten rod into tripod base.
(Also see our no. 1763, Weight Pan, sold separately, for weight-loading experiments.)
All items housed in suitable carton.
|
|
|
|
|
|
|
|
Product number: |
|
1873
|
|
Unit of measure: |
|
Set
|
|
|
|
